Use a mini foam roller to apply three thin coats of semi-gloss latex paint. Allow six to eight hours in between coats. Allow six to eight hours in between coats. It is important that you sand in between coats if you have any drips or residue on the piece.
Hold the can 10-16 in. from the surface of the Adirondack chair and spray in a steady back and forth motion, slightly overlapping each stroke. If you plan to apply a second coat, be sure to apply it within the first hour, while paint is still wet.
Before painting your outdoor furniture make sure you're prepared with these outdoor painting tips. When undertaking a DIY project, there are usually a few things to consider. Add tempermental weather to the list and suddenly that little list has multiplied. How do you prepare your furniture for
How do you paint outdoor wood furniture Step 1 - Clean the furniture. Give it a good cleaning to get all the dirt and grime out. STEP 2 - Fix and make basic repairs. If you have dents or holes, STEP 3 - Sand. Using a sanding sponge, go over the entire furniture to give it a light sand Step
Apply one coat of exterior primer to the furniture using a brush. Use strokes in the same direction as the wood grain. Allow to dry completely. Apply one coat of exterior paint with a brush and allow furniture to dry completely. Apply additional coats, if desired, and allow furniture to dry completely before using the furniture.
Outdoor Wood Furniture. The best way to get a flawless finish with spray paint and guarantee that the paint will not not run is to do two light coats moving your hand back and forth quickly. If you spray the can at least 10″-12″ from the piece, you will get a very light coat that will not run.